Mould Release Agents (Concentrol)

0161 205 4454 Email Us Download Spec & Safety Sheet

CONCENTROL release agents have been developed after years of intense research with experience in sectors as diverse as:

Car: seats, backrests, headrests, sunshades, steering wheels, dashboards, soundproofing, gear shift knobs, window encapsulation, armrests, air filters, etc.
Footwear: single or dual density soles as such or in direct injection process.
Furniture: padding for sofas and office chairs, mattresses, pillows, armrests, imitation wood pieces, etc.
Construction: thermal and sound insulation panels, decorations, moldings, etc.
Electrical applications
Others: toys, navigation, aviation, sports equipment, etc.

Hot cured flexible Polyurethane foam release agents
Product	Grade	Properties	Application
Concentrol®	LP CA-2200 AR	Water-based, concentrated for dilution	Seat cushions and back rests. Soft anti-noise finish.
Concentrol®	LP CA-20-50 AR	Water-based, concentrated for dilution	Seat cushions and back rests.

Cold cured flexible Polyurethane foam release agents: Diluted ready to use
Product	Grade	Properties	Application
Concentrol®	LP FD-61	Solvent-based, Low solid content, flash point <21°C	Viscoelastic MDI foams. Temperatures 40 - 55 °C
Concentrol®	LP FD-5-2	Solvent-based, Low solid content, flash point <21°C	MDI and / or TDI foams. Room temperature moulds (30 - 50 °C) Open pore
Concentrol®	LP FD-67 RS	Solvent-based, Low solid content, flash point <21°C	MDI and / or TDI foams. Mould temperature 50-70 °C soft touch and low build up.
Concentrol®	LP FD-62-1	Solvent-based, flash point <21°C	Furniture MDI foams.

Flexible cold cured Polyurethane foam release agents: Concentrated ready to use
Product	Grade	Properties	Application
Concentrol®	LP FC-45 PTR	Solvent-based, concentrated, flash point >23°C	Soundproofing. Mould temperature 50-60 °C
Concentrol®	LP FC-68 CFM	Solvent-based, concentrated, flash point >55°C	Soundproofing. Mould temperature 55-75 °C
Concentrol®	LP FC-68 OP	Solvent-based, concentrated, flash point >23°C	Soundproofing. Mould temperature 50-70 °C. Open pore.
Concentrol®	LP FC-67 LT-1	Solvent-based, concentrated, flash point >23°C	MDI and / or TDI foams. Mould temperature 50-70 °C soft touch and low build up.
Concentrol®	LP FC-67-3 LT-1	Solvent-based, concentrated, non flamable, flash point >55°C	MDI and / or TDI foams. Mould temperature 50-70 °C soft touch and low build up.
Concentrol®	LP FC-5-2	Solvent-based, concentrated, flash point >23°C	MDI foams. Low mould temperatures. Open pore

Flexible cold cured Polyurethane foam release agents: Concentrated for dilutution
Product	Grade	Properties	Application
Concentrol®	LP FDC-58	Solvent-based, concentration for dilution	MDI and / or TDI foams. Mould temperature 50-65 °C
Concentrol®	LP FDC-585	Solvent-based, concentration for dilution	TDI or mixture foams. Mould temperature 55-70 °C
Concentrol®	LP FDC-57	Solvent-based, concentration for dilution	MDI and / or TDI foams. Mould temperature 50-65 °C . Small pore. Stable dilution
Concentrol®	LP FDC-59	Solvent-based, concentration for dilution	Viscoelastic MDI foams. Mould temperature 40-55 °C
Concentrol®	LP FDC-5-2	Solvent-based, concentration for dilution	MDI foams. Mould temperature 40-55 °C. Open pore
Concentrol®	LP FDC-LT-1	Solvent-based, concentration for dilution	MDI and / or TDI foams. Mould temperature 50-70 °C soft touch and low build up.

Flexible cold cured Polyurethane foam release agents: Water-based
Product	Grade	Properties	Application
Concentrol®	LP FA-138-1050-71	Water-based	MDI and / or TDI foams. Greasy anti-noise finish
Concentrol®	LP FA-138-1051-MPV	Water-based	Soundproofing MDI foams. Greasy finish, suitable for viscoelastic
Concentrol®	LP FA-138-1275 PS	Water-based	MDI and / or TDI general use foams. Soft, pleasant touch. Wide range of working temperatures.
Concentrol®	LP FA-145 CF-213 AAV	Water-based	Soundproofing MDI foams. Soft, pleasant touch.
Concentrol®	LP FA-X-11 MS	Water-based	Dry finish, allows surface glueing, MDI and / or TDI foams. Mould temperature depending on formulation
Concentrol®	LP FA-5-11 PA	Water-based	Dry finish, allows surface glueing, MDI and / or TDI foams. Mould temperatures 55-70 °C, soundproofing
Concentrol®	LP FA-4-11 WR	Water-based	Soft and silky finish, possibility of surface glueing, MDI foams. Mould temperatures 45-60 °C. Head rests and seat cushions.
Concentrol®	LP FA-138-50-PV	Water-based, concentrated for dilution	MDI and / or TDI foams. Greasy finish anti-noise. General use.

Flexible, Rigid and semi-rigid integral skin foams. Flexible with integral skin
Product	Grade	Properties	Application
Concentrol®	LP IC-16-2	Solvent-based, Concentrated, flash point >55 °C. Contains silicone	General use, shiny finish
Concentrol®	LP NL-2-27	Solvent-based, Concentrated, flash point >23 °C. Contains silicone	General use, ideal for steering wheels, satin - matt finish
Concentrol®	LP IC-902 PC	Solvent-based, Concentrated, flash point >23 °C. Without silicone	General use, satin finish. Silicone free
Concentrol®	LP IC-5	Solvent-based, Concentrated, flash point >55 °C. Contains silicone	General use, satin finish
Concentrol®	LP IA-112 SS	Water-based. Contains silicone	Integral skin, General use, ideal for steering wheels. Satin finish.
Concentrol®	LP IA-112	Water-based. Contains silicone	Integral skin, General use, ideal for steering wheels. Matt finish.
Concentrol®	LP IA-118 CX	Water-based. Contains silicone	Integral skin, General use, ideal for furniture
Concentrol®	LP IA-114-10	Water-based. Contains silicone	Integral skin, General use, Shiny finish.

Flexible, Rigid and semi-rigid integral skin foams. Integral skin rigid and semi-rigid
Product	Grade	Properties	Application
Concentrol®	LP ID-902 ALF	Solvent-based, without silicone	Rigid and semi-rigid
Concentrol®	LP LC-902 PC	Solvent-based, Concentrated, without silicone	Rigid and semi-rigid
Concentrol®	LP ID C-902 PC	Solvent-based, Concentrated for dilution. Without silicone	Rigid and semi-rigid
Concentrol®	LP FA-313 G	Water-based.	Rigid and semi-rigid. Greasy touch
Concentrol®	LP PFA-132 V	Water-based. Application by brush	Rigid and semi-rigid. Greasy touch

Footwear integral skin foam release agents (Shoe soles)
Product	Grade	Properties	Application
Concentrol®	LP IDC-121 PC	Concentrated for dilution, 100% solids	Polyester shoe soles, shiny finish.
Concentrol®	LP IDC-5-50 CR	Concentrated for dilution	Polyester, shoe soles and direct injection, matt finish.
Concentrol®	LP ZBC-49-GVE	Concentrated, flash point 42°C	Dual density shoe soles.
Concentrol®	LP ZBC-49-GVZ	Concentrated, flash point <21°C	Dual density shoe soles. Electrostatic application
Concentrol®	LP ZBDC-49-GVE	Concentrated for dilution	Dual density shoe soles.
Concentrol®	LP ZMC-17 AP	Concentrated, flash point 28°C	Polyether, shoe soles and direct injection, matt finish
Concentrol®	IDC-300	Concentrated for dilution	Polyether and polyester, shoe soles and direct injection, shiny finish
Concentrol®	LP IC-125-12 PC	Concentrated, flash point >26°C	Polyester, shoe soles and direct injection, shiny finish
Concentrol®	LP IDC 121 HC-2	Concentrated for dilution	Polyether, polyester, shoe soles and direct injection, shiny finish once polished
Concentrol®	LP IA-118 CX	Water-based	Polyether, shoe soles and direct injection, shiny finish
Concentrol®	LP IA-112 SS	Water-based	Polyether, shoe soles and direct injection, matt finish
Concentrol®	LP 1A-114-10	Water-based, ready to use	Polyether, shoe soles and direct injection, shiny finish
Concentrol®	LP IADC-114-57 ESB	Water-based, Concentrated for dilution	Polyether, shoe soles and direct injection, shiny finish
Concentrol®	LP IADC-114-43 PHB	Water-based, Concentrated for dilution	Moulded Phylon, shiny finish, high performance

Release agents for Polyurethane rigid insulation panels
Product	Grade	Properties	Application
Concentrol®	LP RD-17 KC	Sovent-based, flash point <21°C	Insulation panel
Concentrol®	LP RC-17 C	Sovent-based, flash point >55°C	Insulation panel
Concentrol®	LP RDC-17 C	Sovent-based, Concentrated for dilution	Insulation panel
Concentrol®	LP PFA-132 V	Water-based, application by brush	Insulation panel, Greasy touch
Concentrol®	LP RA-11 W	Water-based, Concentrated for dilution	Dry finish

Wood imitation rigid foam release agent
Product	Grade	Properties	Application
Concentrol®	LP RD-8-6	Sovent-based, Without silicone	Wood imitation rigid, paintable after degreasing
Concentrol®	LP RC-8-6	Sovent-based, Concentrated without silicone	Wood imitation rigid, paintable after degreasing
Concentrol®	LP RDC-8	Sovent-based, Concentrated for dilution. Without silicone	Wood imitation rigid, paintable after degreasing

R.I.M process polyurethane foam release agent
Product	Grade	Properties	Application
Concentrol®	IDC-902 PC	Sovent-based, Concentrated for dilution without silicone	R.I.M and R.R.I.M. satin finish, paintable after degreasing
Concentrol®	LP IC-5	Sovent-based, Non flamible, class 3 contains silicone	R.I.M and R.R.I.M. satin - matt finish

Elastomer polyurethane release agents
Product	Grade	Properties	Application
Concentrol®	LP IDC-188 PC	Concentrated for dilution	Elastomers, contain silicone, high viscosity
Concentrol®	LP IDC-121 PC	Concentrated for dilution	Elastomers, contain silicone
Concentrol®	47 M-2 H	Sovent-based, Concentrated, flash point >23°C	Elastomers, does not contain silicone
Concentrol®	LMD-12 D	Sovent-based, high concentration	Elastomers, contain silicone

Auxiliary products for moulded polyurethane foam
Product	Grade	Properties	Application
Anti-squeak
Concentrol®	AD-67 WIP	Water-based	Anti-squeak, post treatment for the foam, blue colour
Concentrol®	AD-66 X-3 WIP	Water-based	Anti-squeak, post treatment for the foam, blue colour
Concentrol®	AD-67 UV	Water-based	Anti-squeak, post treatment for the foam, blue colour. UV detectable
Deslizante®	SEC	Solvent-based	Surface treatment to obtain an anti-squeak finish with sliding properties
Mould cleaners
Limpiador®	LML-530	Solvent-based	Mould cleaner, contains NMP
Limpiador®	LML-1200	Solvent-based	Highly effective mould cleaner, contains NMP
Limpiador®	LML-1300	Solvent-based	Mould cleaner, does not contain NMP
Limpiador®	LML-1300 W	Solvent-based	Mould cleaner, in gel form, does not contain NMP
Reinforcing pastes
Concentrol®	LP PFA-132 V	Water-based	Flexible foam reinforcing paste, greasy finish
Concentrol®	LP PFA-6	Water-based	Flexible foam reinforcing paste, dry finish
Concentrol®	LP FP-150	Solvent-based	Integral skin foam reinforcing paste, without silicone
Concentrol®	FP-143	Solvent-based	Flexible foam reinforcing paste
Concentrol®	FP-158	Solvent-based	Flexible foam reinforcing paste, anti-chip off effect
Concentrol®	LP RC-11-22	Solvent-based	Rigid and semi-rigid foam release agent paste
Adhesives
Tacktrol®	CCA	Water-based	Mono-component adhesive for flexible foam, low viscosity
Internal release agents
Concentrol®	INT PU-5	100%	Integral release agent for R.I.M and high density polyurethane
Aerosols
Desmotrol®	DP-7	Aerosol	Matt finish integral skin
Desmotrol®	DP-12	Aerosol	Shiny finish integral skin

For more information: Please fill out our enquiry form or give us a call.

The information shown on this page(s) is intended as a product guide only; specification and properties of products are subject to change by the manufacturer and no guarantees or warranties are implied or inferred by the information provided here. It is the responsibility of the user to request the most current information and determine the suitability of any product in the user’s application.

*in line with our commitment to Responsible Care^®, a pre-delivery safety inspection will generally be required prior to the first bulk delivery of a hazardous liquid.

Mould Release Agents (Concentrol)

Enquiry Form